CMOD S7 BREADBOARDABLE

SPARTAN-7 FPGA Geliştirme Kartı

Üretici Firma:

Digilent
Ürün Kodu 410-376 Kategori

 722,74

Fiyatı :

Stokta yok

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email

CMOD S7 BREADBOARDABLE MODULE

Product Description

The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.

 

Features:

  • Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
  • 3,650 slices containing four 6-input LUTs and 8 flip-flops
  • 1,620 Kbits of fast block RAM
  • Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
  • 80 DSP slices
  • Internal clock speeds exceeding 450 MHz
  • On-chip analog-to-digital converter (XADC)
  • Programmable over JTAG and Quad-SPI Flash

 

  • Memory
    • 4 MB Quad-SPI Flash
  • Power
    • Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
  • USB
    • USB-JTAG programming circuitry
    • USB-UART bridge
  • Push-buttons and LEDs
    • 2 Buttons
    • 4 LEDs
    • 1 RGB LED
    • Expansion Connectors
  • 1 Pmod connector
    • 8 total FPGA I/O
  • 48-pin DIP form-factor headers
    • 36 populated pins
      • 32 total FPGA I/O
      • 2 Single-ended 0-3.3V analog inputs to XADC
 
 

Paket içeriği :

CMOD S7 Kartı