MY-CAM003M MIPI Camera Module
Stok Kodu : MY-CAM003M
1.638,00 TL
* 176,09 TL den başlayan taksitlerle!
MY-CAM003M MIPI Camera Module
The MY-CAM003M MIPI Camera Module is released by MYIR especially for working on MYIR's development boards. It is connected with the board through a MIPI-CSI interface (24-pin FPC connector) and supports resolution up to 2592 by 1944 pixels. It is using OV5640 image sensor which is a 5 MegaPixel CMOS camera. The module is measuring only 59mm by 33mm with small form factor, low power consumption, high performance which can be used in various products.
MY-CAM003M MIPI Camera Module (top-view and bottom-view)
Dual MY-CAM003M Camera Modules working on MYD-JX8MX Development Board
Features
|
Item |
Paramenters |
|
| Active Array Size | 2592 x 1944 | |
| Power Supply | Core | 1.5VDC ± 5% (with embedded 1.5V regulator) |
| Analog | 2.6 ~ 3.0VDC | |
| I/O | 1.8V to 2.8V | |
| Power Requirements | Active | 140 mA |
| Standby | 20 μA | |
| Temperature Range | Operation | -30℃ to 70℃ junction temperature |
| Stable Image | 0℃to 50℃ junction temperature | |
| Output Formats (8-bit) | 8-/10-bit RGB RAW data | |
| Lens size | 1/4″ | |
| Lens chief ray angle | 24° | |
| Input clock frequency | 6~27 MHz | |
| Max S/N Ratio | 36 dB (maximum) | |
| Dynamic Range | 68 dB @ 8x gain | |
| Maximum Image Transfer Rate | QSXGA (2592x1944) | 15 fps |
| 1080P | 30 fps | |
| 1280x960 | 45 fps | |
| 720p | 60 fps | |
| VGA (640x480) | 90 fps | |
| QVGA (320x240) | 120 fps | |
| Sensitivity | 600 mV/Lux-sec | |
| Shutter | Solling shutter / frame exposure | |
| Maximum Exposure Interval | 1964 x tROW | |
| Pixel Size | 1.4 μm x 1.4 μm | |
| Dark Current | 8 mV/s at 60℃ junction temperature | |
| Image Area | 3673.6μm x 2738.4μm | |
| Package Dimensions | 5985μm x 5835μm | |
Signals Routed to MIPI-CSI Camera interface (24-pin FPC connector)
| Pin | Signal | Description |
|---|---|---|
| 1 | AGND | Ground |
| 2 | AVDD | Power 2V8 |
| 3 | AF-GND | Ground |
| 4 | AF-VDD | Power 2V8 |
| 5 | STROBE | NC |
| 6 | DVDD | Power 1V5 |
| 7 | DGND | Ground |
| 8 | SCL | SCCB data |
| 9 | SDA | SCCB input clock |
| 10 | RES | Reset (active low with internal pull up register) |
| 11 | DGND | Ground |
| 12 | XCLK | System input clock |
| 13 | DGND | Ground |
| 14 | MDP1 | MIPI TX second data lane positive output |
| 15 | MDN1 | MIPI TX second data lane negative output |
| 16 | DGND | Ground |
| 17 | MCP | MIPI TX clock data lane positive output |
| 18 | MCN | MIPI TX clock data lane negative output |
| 19 | DGND | Ground |
| 20 | MDPO | MIPI TX first data lane positive output |
| 21 | MDN0 | MIPI TX first data lane negative output |
| 22 | DGND | Ground |
| 23 | PWDN | Power down (active high with internal pull down register) |
| 24 | DOVDD | Power 1V8 |
Bu ürüne ilk yorumu siz yapın!