MYC-Y7Z010/20-V2 CPU Module

Stok Kodu : MYC-Y7Z010/20-V2
4.127,54 TL
* 446,12 TL den başlayan taksitlerle!
Marka
Fiyat
97,00 USD + KDV
Seçenekler
MYC-Y7Z010/20-V2 CPU Module

MYC-Y7Z010/20-V2 CPU Module



The MYC-Y7Z010/20-V2 CPU Module is an industrial-grade System-on-Module (SoM) based on Xilinx Zynq-7000 family SoC available for either the XC7Z020 or XC7Z010 version. It has integrated the Zynq-7020 or Zynq-7010 device, 512MB DDR3 SDRAM, 4GB eMMC, 16MB quad SPI Flash, a Gigabit Ethernet PHY and external watchdog on board and provides 1.27mm 180-pin stamp-hole (Castellated-Hole) expansion interface to allow a large number of I/O signals for ARM peripherals and FPGA I/Os to be extended to your base board. The module is ready to run Linux and supports wide working temperature ranging from -40 to +85 Celsius which is ideal for industrial embedded applications.





MYC-Y7Z010/20-V2 CPU Module

  • 667MHz Xilinx XC7Z010/20 ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
  • 512MB DDR3, 4GB eMMC, 16MB QSPI Flash
  • On-board Gigabit Ethernet PHY
  • 1.27mm pitch 180-pin Stamp Hole Expansion Interface
  • Ready-to-Run Linux 4.14
  • Supports -40 to +85 Celsius Extended Temperature Operation for Industrial Applications


MYIR provides a development board MYD-Y7Z010/20-V2 for evaluating the MYC-Y7Z010/20-V2 CPU Module, which employs the MYC-Y7Z010/20-V2 as the controller board by populating the CPU Module on its base board through 1.27mm pitch 180-pin stamp-hole (Castellated-Hole) interface. The base board has extended a rich set of peripheral interfaces including serial ports, USB Host port, three Gigabit Ethernet ports, CAN, TF card slot, JTAG, etc. One 2.54mm pitch 2 x 25-pin expansion header is on the base board to let more GPIOs available for further extension.




MYD-Y7Z010/20-V2 Development Board



Features

Mechanical Parameters

  • Dimensions: 75mm x 50mm (10-layer PCB design)
  • Power supply: 5V
  • Working temp.: -40~85 Celsius (industrial grade)

SoC

  • Xilinx XC7Z010-1CLG400I (Zynq-7010) / XC7Z020-1CLG400I (Zynq-7020)
    • 667MHz dual-core ARM® Cortex™-A9 MPCore processor (up to 866MHz, for XC7Z010 or XC7Z020)
    • Integrated Artix-7 class FPGA subsystem with:
      • 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
      • 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
    • NEON™ & Single / Double Precision Floating Point for each processor
    • Supports a Variety of Static and Dynamic Memory Interfaces

Memory

  • 512MB DDR3 (2 x 256MB, 32-bit)
  • 4GB eMMC
  • 16MB QSPI Flash

Peripherals and Signals Routed to Pins

  • 10/100/1000M Ethernet PHY (YT8521SH)
  • External watchdog
  • Three LEDs
    • One red LED for power indicator
    • One green LED for FPGA program done indicator
    • One flashing green LED for system indicator
  • 1.27mm pitch 180-pin Stamp Hole Expansion Interface brings out below signals:
    • One Gigabit Ethernet
    • One USB
    • Two Serial ports
    • Two I2C
    • Two CAN BUS
    • Two SPI
    • Two ADC (16-channel ADC brought out through PL pins)
    • One SDIO


OS Support

  • Linux 4.14




Order Part No and Packing List

Item Part No. Included

MYC-Y7Z010/20-V2

MYC-Y7Z010-V2-4E512D-667-I
(for XC7Z010-1CLG400I)

- One MYC-Y7Z010-V2 CPU Module

MYC-Y7Z020-V2-4E512D-766-I
(for XC7Z020-2CLG400I)

- One MYC-Y7Z020-V2 CPU Module

MYD-Y7Z010/20-V2
Development Board

MYD-Y7Z010-V2-4E512D-667-I
(for XC7Z010-1CLG400I)

- One MYD-Y7Z010/20-V2 Board
- One 1.5m cross Ethernet cable
- One DB9 converting cable
- One Power converting cable
- One 12V/1.25A Power adapter
- One product disk
(including user manual, base board schematic in PDF format, datasheets and software package)

MYD-Y7Z020-V2-4E512D-766-I
(for XC7Z020-2CLG400I)



Hardware Specification

The Zynq®-7000 All Programmable SoC (AP SoC) family integrates the software programmability of an ARM®- based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. Consisting of single-core Zynq-7000S and dual-core Zynq-7000 devices, the Zynq-7000 family is the best price to performanceper-watt, fully scalable SoC platform for your unique application requirements.



Zynq-7000S

Zynq-7000S devices feature a single-core ARM Cortex™-A9 processor mated with 28nm Artix®-7 based programmable logic, representing the lowest cost entry point to the scalable Zynq-7000 platform. It includes Zynq Z-7007S, Z-7012S and Z-7014S which target smaller embedded designs. Available with 6.25Gb/s transceivers and outfitted with commonly used hardened peripherals, the Zynq-7000S delivers cost-optimized system integration ideal for industrial IoT applications such as motor control and embedded vision.




Zynq-7000

Zynq-7000 devices are equipped with dual-core ARM Cortex-A9 processors integrated with 28nm Artix-7 or Kintex®-7 based programmable logic for excellent performance-per-watt and maximum design flexibility. With up to 6.6M logic cells and offered with transceivers ranging from 6.25Gb/s to 12.5Gb/s, Zynq-7000 devices enable highly differentiated designs for a wide range of embedded applications including multi-camera drivers assistance systems and 4K2K Ultra-HDTV.













Software Features

Item Features Description Remark
Cross compiler gcc 6.2.1 gcc version 6.2.1 20161114
(Linaro GCC Snapshot 6.2-2016.11)
Boot program BOOT.BIN First boot program including FSBL, bitstream Source code provided
u-boot Secondary boot program Source code provided
Linux Kernel Linux 4.14 Customized kernel for MYD-Y7Z010/20-V2 Development Board Source code provided
Drivers USB Host USB Host driver Source code provided
Ethernet Gigabit Ethernet driver Source code provided
MMC/SD/TF MMC/SD/TF card driver Source code provided
CAN CAN driver Source code provided
LCD Controller LCD driver Source code provided
HDMI HDMI (SII902X chip) driver Source code provided
Button Button driver Source code provided
UART UART driver Source code provided
LED LED driver Source code provided
GPIO GPIO driver Source code provided
QSPI QSPI Flash W25Q128FW driver Source code provided
RTC DS3231 RTC driver Source code provided
Resistive Touch TSC2007 resistive touch screen driver Source code provided
Capacitive Touch FT5X0X capacitive touch screen driver Source code provided
ADC ADC driver Source code provided
File System Ramdisk Ramdisk system image
Rootfs.tar Tar file


Downloads

Xilinx Zynq-7000 Overview Download
MYD-Y7Z010/20-V2 Development Board Overview Download
MYC-Y7Z010/20-V2 CPU Module Overview Download
MYC-Y7Z010/20-V2 CPU Module Pinout Description Download
CE Certification of MYC-Y7Z010/20-V2 CPU Module Download
3D STEP file of MYC-Y7Z010/20-V2 CPU Module Download
İşlemci Tipi : Xilinx
Bu ürüne ilk yorumu siz yapın!
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
MYC-Y7Z010/20-V2 CPU Module MYC-Y7Z010/20-V2
MYC-Y7Z010/20-V2 CPU Module

Tavsiye Et

*
*
*
IdeaSoft® | Akıllı E-Ticaret paketleri ile hazırlanmıştır.