MYD-YA15XC-T Development Board MYD-YA151C-V2-256N256D-65-I-T
MYD-YA15XC-T Development Board
The MYD-YA15XC-T development board is using the MYC-YA15XC-T CPU Module as core controller board which is populated on a specially designed base board through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface. The MYD-YA15XC-T is a good reference design for using ST STM32MP1 Processors which features 650MHz Single or Dual Arm Cortex-A7 and 209MHz Cortex-M4 Cores. Typical applications are industrial control, consumer electronics, smart home, medical and more other energy-efficient applications which require rich performance and low power.
The MYC-YA15XC-T CPU Module has integrated the STM32MP151 processor (STM32MP151AAC3T by default), a Power-Management IC STPMIC1, DDR3L, Nand Flash or eMMC and 32KB EEPROM. In addition to the main components, the MYD-YA15XC-T has extended a number of peripherals through connectors to its base board including Debug Serial port, USB Type-C DRP, Dual USB2.0 HOST, Gigabit Ethernet, Micro SD Card Slot, LCD and Camera as well as GPIOs through pin headers. MYIR also offers MY-CAM011B Camera Module, MY-WF005S WiFi/BT Module, MY-WIREDCOM RPI Module (RS232/RS485/CAN) and MY-LCD70TP-C LCD Module as options for the board which have greatly enhanced the functionality of the board.

MYC-YA15XC-T CPU Module (Top-view)
- MYC-YA15XC-T CPU Module as Controller Board
- ST STM32MP1 MPU based on 650MHz Single or Dual Arm Cortex-A7 and 209MHz Cortex-M4 Cores
- 256MB/512MB DDR3L, 256MB Nand Flash/ 4GB eMMC, 32KB EEPROM, Power Management IC (PMIC)
- 1 x USB Type-C DRP, 2 x USB2.0 HOST, Gigabit Ethernet, LCD, Camera, Micro SD Card Slot
- Supports Running Linux OS
- Optional 7-inch LCD Module, Camera Module, WiFi/BT Module and RPI Module
The MYD-YA15XC-T is running Linux with provided 5.4.31 kernel and many drivers in source code. It is delivered with one Quick Start Guide, one USB Type-C cable, one DC power jack plug adapter and one 5V/2A power adapter to enable users to start rapid development when getting the board out-of-box.

MYD-YA15XC-T Development Board (Top-view)

MYD-YA15XC-T Development Board (Bottom-view)
Features
Mechanical Parameters
- Dimensions: 137.3mm x 105mm (base board), 39mm x 37mm (CPU Module)
- PCB Layers: 4-layer design (base board), 10-layer design (CPU Module)
- Power Supply: 5V/2A (base board), 5V/0.5A (CPU Module)
- Working Temperature: -40~85°C
The MYD-YA15XC-T Controller Board (MYC-YA15XC-T CPU Module)

Processor
- STMicroelectronics STM32MP151AAC3 Microprocessor (STM32MP153AAC3 and STM32MP157AAC3 are compatible and can be customized)
- The STM32MP1 series is available in 3 different lines which are pin-to-pin compatible:
- STM32MP151: Single Cortex-A7 core up to 800 MHz, Cortex-M4 core @ 209 MHz
- STM32MP153: Dual Cortex-A7 cores up to 800 MHz, Cortex-M4 core @ 209 MHz and CAN FD
- STM32MP157: Dual Cortex-A7 cores up to 800 MHz, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD
Memory
- 256MB DDR3L, 256MB Nand Flash / 512MB DDR3L, 4GB eMMC Flash
- 32KB EEPROM
Peripherals and Signals Routed to Pins
- Power Management IC (STPMIC1APQR)
- 1.0mm pitch 148-pin stamp hole expansion interface
- Includes:
- 8 x Serial ports
- 5 x I2C
- 4 x SPI
- 16 x ADC
- 2 x USB Host or 1 x USB Host plus 1 x USB OTG
- 2 x SDIO
- 1 x RGMII
- 2 x CAN (only for STM32MP153 and STM32MP157)
- 5 x LPTIM and 10 TIM
- 1 x RGB Interface (supports 16-/18-/24-bit, resolution up to 1366 x 768 @60fps)
- Up to 109 x GPIOs
The MYD-YA15XC-T Development Board Base Board
- 1 x Power Jack
- 1 x Debug UART (USB Type-C connector)
- 2 x USB2.0 Host port
- 1 x USB Type-C DRP
- 1 x 10/100/1000 Mbps Ethernet interface (RJ45)
- 1 x Micro SD card slot
- 1 x Camera Interface (0.5mm pitch 30-pin FPC connector)
- Supports MYIR’s MY-CAM011B Camera Module through J12
- 1 x CSI Signal Interface (J12, 2.54mm 2×10-pin male expansion header)
- 1 x LCD Interface (0.5mm pitch 50-pin FPC connector, supports resolution up to 1366 x 768 @60fps)
- Supports MYIR’s MY-LCD70TP-C LCD Module with Capacitive Touch Screen through the LCD interface
- 1 x RPI Interface (J15, 2.54mm 2×20-pin male expansion header)
- 2 x SPI
- 2 x UART
- 2 x I2C
- 1 x CAN
- 1 x SAI
- Supports MYIR’s MY-WIREDCOM RPI Module through J15 to extend CAN, RS485 and RS232 functions
- 1 x 2.54mm 2×10-pin male expansion header (J17)
- 2 x USB
- 2 x ADC
- GPIOs
- 1 x 2.54mm 2×10-pin male expansion header (J19)
- 1 x SDIO
- 2 x UART
- Supports MYIR’s MY-WF005S WiFi/BT Module through the J19
- 2 x LEDs (one for power indicator and one for system running indicator)
- 1 x RTC battery holder (1.25mm pitch 2-pin connector)
- 3 x Buttons (one for Power On/Off, one for Reset and one for USER)
- 1 x RGB/TP Extension Interface (J14, 2.54mm 2×25-pin male expansion header)
OS Support
- Linux 5.4.31
Order Part No and Packing List
Development Boards | Packing List | |
---|---|---|
MYD-YA151C-4E512D-65-I-T |
|
|
MYD-YA151C-V2-256N256D-65-I-T | ||
SOM Module | Packing List | |
MYC-YA151C-4E512D-65-C-T | One MYC-YA151C-T Module | |
MYC-YA151C-4E512D-65-I-T | One MYC-YA151C-T Module | |
MYC-YA151C-256N256D-65-I-T | One MYC-YA151C-T Module | |
MYC-YA151C-256N256D-65-C-T | One MYC-YA151C-T Module |
Hardware Specification
The MYC-YA15XC-T CPU Module is using STMicroelectronics STM32MP151AAC3 Microprocessor with 12 x 12 mm, 0.5 mm pitch, TFBGA361 package which is among the STM32MP1 Series. The STM32MP1 series is based on a heterogeneous single or dual Arm Cortex-A7 and Cortex-M4 cores architecture, strengthening its ability to support multiple and flexible applications, achieving the best performance and power figures at any time. The Cortex-A7 core provides access to open-source operating systems (Linux/Android) while the Cortex-M4 core leverages the STM32 MCU ecosystem. It is available in 3 different lines which are pin-to-pin compatible:
- STM32MP157: Dual Cortex-A7 cores @ 650 MHz, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores @ 650 MHz, Cortex-M4 core @ 209 MHz and CAN FD
- STM32MP151: Single Cortex-A7 core @ 650 MHz, Cortex-M4 core @ 209 MHz
Each line comes with a security option (cryptography & secure boot)






Software Features
Item | Features | Description | Source Code |
---|---|---|---|
Bootstrap Program | TF-A-2.2 | Arm Trusted Firmware | YES |
Bootloader | U-Boot-2020.01 | ||
Linux Kernel | Linux-5.4.31 | Customized based on ST kernel_5.4.31 version for MYD-YA15XC-T | YES |
Drivers | NAND | Nand Flash driver | YES |
MMC | eMMC driver | YES | |
USB Host | USB Host driver | YES | |
USB OTG | USB OTG driver | YES | |
I2C | I2C driver | YES | |
SPI | SPI driver | YES | |
Ethernet | 10M/100M/1000M Ethernet driver | YES | |
RS232/RS485/Uart | Serial driver | YES | |
LCD | LCD driver, supports MYIR’s 7-inch LCD with 800 x 480 pixels resolution | YES | |
Touch | Capacitive touch screen driver | YES | |
RTC | RTC driver | YES | |
GPIO Key | Key driver | YES | |
GPIO LED | LED driver | YES | |
CAN | CAN Bus driver | YES | |
HDMI | HDMI driver | YES | |
WiFi & BT | WiFi/BT driver (SDIO) | YES | |
File System | myir-image-full | Full-featured file system with MEasy HMI V2.0 | YES |
myir-image-core | Simplified system with core features | YES | |
Tools | STM32CubeProgrammer | ST programmer software | YES |
STM32CubeMX | ST configuration integration tool | BIN | |
STM32CubeIDE | ST development tool | BIN | |
Applications | GPIO LED | LED example | YES |
GPIO KEY | KEY example | YES | |
NET | TCP/IP Socket C/S example | YES | |
RTC | RTC example | YES | |
RS232 | RS232 example | YES | |
RS485 | RS485 example | YES | |
CAN | CAN example | YES | |
LCD | LCD Display example | YES | |
Camera | Camera Display example | YES | |
UART | UART example | YES | |
HMI 2.0 | MYiR-MEasy_hmi 2.0 | YES | |
Compiler Tool Chain | Cross compiler | arm-ostl-linux-gnueabi-gcc 9.3.0 | BINARY |
Yocto Project™ | Yocto | Dunfell 3.1 | YES |
İşlemci Tipi | : | ST |